Kinematic Viscosity Converter
Result
1 mm²/s
Kinematic viscosity conversion to all units
| Unit | Symbol | Result | Copy |
|---|---|---|---|
| Square meter per second | m²/s | 1 × 10⁻⁶ | |
| Square millimeter per second | mm²/s | 1 | |
| Square centimeter per second | cm²/s | 0.01 | |
| Stokes | St | 0.01 | |
| Centistokes | cSt | 1 | |
| Square foot per second | ft²/s | 1.07639 × 10⁻⁵ | |
| Square inch per second | in²/s | 0.0016 |
Kinematic viscosity is a fluid's viscosity divided by its density, which shows how fast it flows under gravity. Lubricating and fuel oils are graded in centistokes (cSt), the same as mm²/s. See also: Centistokes to Square Millimeters per Second and Flow Rate Converter.
Kinematic viscosity units
| Unit | Symbol | In base unit (m²/s) |
|---|---|---|
| Square meter per second | m²/s | 1 m²/s = 1 m²/s |
| Square millimeter per second | mm²/s | 1 mm²/s = 1 × 10⁻⁶ m²/s |
| Square centimeter per second | cm²/s | 1 cm²/s = 0.0001 m²/s |
| Stokes | St | 1 St = 0.0001 m²/s |
| Centistokes | cSt | 1 cSt = 1 × 10⁻⁶ m²/s |
| Square foot per second | ft²/s | 1 ft²/s = 0.0929 m²/s |
| Square inch per second | in²/s | 1 in²/s = 0.0006 m²/s |
Kinematic viscosity converters
Frequently asked questions
How do I convert cSt to cP?
Multiply by the density in g/cm³. An oil of 100 cSt and 0.9 g/cm³ is about 90 cP.
What viscosity is engine oil?
SAE 10W-40 is roughly 90 to 110 cSt at 40 °C and 13 to 15 cSt at 100 °C, depending on the brand.
How many cSt is 1 ft²/s?
1 ft²/s is 92,903.04 cSt.
Factors from NIST SP 811 and SI definitions · Last updated · How we verify these conversions